IMR and hyperMILL
Irish Manufacturing Research has teamed up with experts at OPEN MIND to convey in-depth application knowledge and practice-oriented information, so that you can use hyperMILL® and hyperCAD®-S effectively in your everyday work and achieve optimum results. If your employees are well-trained and capable of using a modern, high-performance piece of software in a productive manner, it will guarantee your company’s success in the long term:
- Better CAM programming results
- More expertise for higher productivity
- Motivate employees with continuous education.
CNC CADCAM Courses
IMR will offer a range of hyperMILL courses including beginner and intermediate 3-axis, 5-axis milling and Turning programming. These will be updated with new courses throughout the year so make sure and sign up to the CNC Training Course mailing list to keep updated.
Is there funding available?
Yes, your company may qualify for full or partial funding
TRAINING COORDINATORS
Chris Judge
Machining Applications Specialist
Peter Purcell
Learning and Development
TRAINING FACILITATOR
hyperMILL
SUBSCRIBE FOR CNC TRAINING UPDATES
Current Courses
hyperMILL Part 1 Training
The course is an introduction to HyperMILL aimed at operators and setters looking to acquire new and upgrade existing skills, and at adult learners with knowledge and experience of the machining process looking to make the step up to CNC Programming.
Dates: TBC (Register your interest to be notified of next course date)
hyperMill Part 2 Training
The HyperMILL CADCAM course is aimed at operators and setters looking to acquire new and upgrade existing skills, and at adult learners with knowledge and experience of the machining process looking to make the step up to CNC Programming.
Dates: 20th – 22nd of August, 2024 (3-day course)
hyperMILL 5 Axis Training
The course is an advanced CADCAM course aimed at upskilling CADCAM programmers in 5Axis simultaneous machining cycles to manufacture complex 3D parts using state of the art CADCAM technology.
Dates: 18th – 19th of November, 2024 (2-day course)
hyperMILL Turning Training
The course is an advanced CADCAM course aimed at helping attendees to understand how and when to use various turning cycles depending upon the underlying part geometry.
Dates: TBC (2 day course)
Sign up for IMR CNC Training Updates
